Capillary electrophoresis-acid barrage stacking online enrichment method for highly sensitive determination of four isoflavones

A capillary electrophoresis-acid barrage stacking online enrichment method has been established to detect the four isoflavones which are Daidzein, Genistein, Formononetin, and Biochanin A. The proposed method was optimized using a single factor alternative method, and the optimal conditions obtained from the optimization were: the BGE was 25 mM borax and 2 mM β-cyclodextrin, the applied separation voltage was 20 kV, and the detection wavelength was 260 nm. The time ratio of the injection of sample and the injection of acid was 150 s:20 s, and the acid used was 250 mM acetic acid. The sample solvent used was 60% v/v acetonitrile. The established method had the enrichment factor of these four isoflavones at 24.5, 32.0, 29.2, and 33.7, respectively, LOD and LOQ are as low as nanograms per milliliter. Finally, the CE-acid barrage stacking method was successfully applied to the determination of four isoflavones in rat plasma and red clover extract, verifying the applicability and feasibility of the method.     

Sample preparation,instrumental analysis,and natural distribution of complex organic pollutants in the wastewater from unconventional gas production

Large amounts of flowback and produced water (FPW) have been generated from hydraulic fracturing process for the production of unconventional gas such as shale gas. Complex organic pollutants are abundantly present in FPW with revealed toxicity to aquatic organisms and these contaminants may transfer into surrounding aquatic environment. Characterization and determination of complicated organic pollutants in FPW remains a challenge due to its complex composition and high salinity matrix. This review article covers the progress of recent 5 years regarding the sample preparation and instrumental analysis methods and thus summarizes the advantages and disadvantages of these methods for critical analysis of organic contaminants in FPW samples. Furthermore, the natural distribution of detected organic compounds and their transformation were reviewed and discussed to enhance the understanding of spatial and temporal behaviors of these organic pollutants in natural environment, paving the way for future development of pollution control policies and strategies. Enlightened by the studies of FPW contamination in the US, the investigations of FPW contamination in China continued to grow due to rapidly growing production of shale gas in China and resulted pollution.     

Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

“联用技术及元素形态”国际课程探索与实践*

充分利用线上教学的优势,对化学院本科生开设了“联用技术及元素形态”国际课程,避免了传统教学中组织、协调外籍/外地专家资源过程中必要的各种消耗,极大程度地整合教学资源、改善教学效果。在该课程的探索与实践过程中,学生们对痕量元素形态及基于等离子体质谱的各种联用技术产生了极大的兴趣,激发了他们的主动学习热情;教师之间及师生之间的沟通趋向更简单、更灵活、更实时,为后续线上线下混合式国际课程建设提供了良好的基础和借鉴。     

Recent trends in capillary and micro-chip electrophoretic instrumentation for field-analysis

Technical advances in the development of field-deployable capillary and microchip electrophoretic instruments and reports of their deployment between 2013 and 2017 were reviewed. Strategies and considerations in the design of the injection, separation and detection hardware, chemistry and associated infrastructure were discussed from an in-field perspective, with portability, robustness and automation/“ease of use” featuring as key requirements. Integration of functionality is important for adequate in-field performance. Progress was made towards the use of multiple channel devices for increased throughput and/or resolving power, mixing devices for on-line/in-line sample derivatization, battery operation and temperature control. The strengths and weaknesses of the various approaches described in the literature are discussed from the perspective of in-field operation. An overview of the applications of the field electrophoretic instruments is provided, including environmental science and planetary investigation.     

Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

A simple high‐performance liquid chromatography for the determination of linezolid in human plasma and saliva

Linezolid is an antimicrobial agent for the treatment of multiresistant Gram‐positive infections. A practical high‐performance liquid chromatography method was developed for the determination of linezolid in human plasma and saliva. Linezolid and an internal standard (o‐ethoxybenzamide) were extracted from plasma and saliva with ethyl acetate and analyzed on a Capcell Pak C₁₈ MG column with UV detection at 254 nm. The calibration curve was linear through the range 0.5–50 µg/mL using a 200 μL sample volume. The intra‐ and interday precisions were all <6.44% for plasma and 5.60% for saliva. The accuracies ranged from 98.8 to 110% for both matrices. The mean recoveries of linezolid were 80.8% for plasma and 79.0% for saliva. This method was used to determine the plasma and saliva concentrations of linezolid in healthy volunteers who were orally administered a 600 mg dose of linezolid. Our liquid–liquid extraction procedure is easy and requires a small volume of plasma or saliva (200 μL). This small volume can be advantageous in clinical pharmacokinetic studies, especially if children participate. Copyright © 2015 John Wiley & Sons, Ltd.     

Current air quality analytics and monitoring: A review

This review summarizes the different tools and concepts that are commonly applied in air quality monitoring. The monitoring of atmosphere is extremely important as the air quality is an important problem for large communities. Main requirements for analytical devices used for monitoring include a long period of autonomic operation and portability. These instruments, however, are often characterized by poor analytical performance. Monitoring networks are the most common tools used for monitoring, so large-scale monitoring programmes are summarized here. Biomonitoring, as a cheap and convenient alternative to traditional sample collection, is becoming more and more popular, although its main drawback is the lack of standard procedures. Telemonitoring is another approach to air monitoring, which offers some interesting opportunities, such as ease of coverage of large or remote areas, constituting a complementary approach to traditional strategies; however, it requires huge costs.     

材料表征方法理论与实践课程的改革与建设*

通过与超星专业慕课制作团队合作搭建网络教学平台,将线上慕课教学与线下实验教学相结合,对材料表征方法理论与实践课程进行了全方位的改革。与传统实验教学相比,改革后的课程不仅能够激发学生的学习兴趣,实现时间空间的相对自由,还可以完善考核机制,提升教学质量,从而为高校化学研究生实验课程的改革提供一定的借鉴意义。     

Synthesis of α-fluoro-α,β-unsaturated esters monitored by 1D and 2D benchtop NMR spectroscopy

For optimization and control of pharmaceutically and industrially important reactions, chemical information is required in real time. Instrument size, handling, and operation costs are important criteria to be considered when choosing a suitable analytical method apart from sensitivity and resolution. This present study explores the use of a robust and compact nuclear magnetic resonance (NMR) spectrometer to monitor the stereo-selective formation of α-fluoro-α,β-unsaturated esters from α-fluoro-β-keto esters via deprotonation and deacylation in real time. These compounds are precursors of various pharmaceutically active substances. The real-time study revealed the deprotonation and deacylation steps of the reaction. The reaction was studied at temperatures ranging from 293 to 333 K by interleaved one-dimensional ¹H and ¹⁹F and two-dimensional ¹H–¹H COSY experiments. The kinetic rate constants were evaluated using a pseudo first-order kinetic model. The activation energies for the deprotonation and deacylation steps were determined to 28 ± 2 and 63.5 ± 8 kJ/mol, respectively. This showed that the deprotonation step is fast compared with the deacylation step and that the deacylation step determines the rate of the overall reaction. The reaction was repeated three times at 293 K to monitor the repeatability and stability of the system. The compact NMR spectrometer provided detailed information on the mechanism and kinetics of the reaction, which is essential for optimizing the synthetic routes for stepwise syntheses of pharmaceutically active substances.